Enphase ClipperCreek HCS-80 EV Charger
Enphase ClipperCreek HCS-80 EV Charger with J1772 connector
The Enphase ClipperCreek HCS-80 EV Charger delivers high-performance Level 2 charging for both residential and commercial use. Engineered for durability and efficiency, this 64 A charger provides reliable power to handle the demands of modern electric vehicles.
With a rugged NEMA 4-rated enclosure, the HCS-80 is built to withstand extreme weather and daily use in any environment. Its 25 ft flexible charging cable ensures easy reach, while the impact-resistant J1772 connector offers long-lasting protection. Certified to industry safety standards, it represents a dependable, energy-efficient solution for high-speed EV charging.
Charging Speed
The Enphase ClipperCreek HCS-80 EV Charger delivers up to 15.4 kW of charging power, adding approximately 61 miles of range per hour of Level 2 charging.
Technical Specifications
| ELECTRICAL SPECIFICATIONS | |
| Charging power | 64 A (15.4 kW) max |
| Input voltage/Input voltage range | 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC |
| Input voltage frequency | 50/60 Hz |
| Circuit breaker requirement | Dedicated, two-pole 80 A |
| Input cable type | Pre-wired with (L1, L2, Gnd) 8 AWG service whip/ 3' (914.4 mm) |
| Input cable length |
|
| Maximum output current/Output power | 64 A continuous/15.36 kW |
| Output cable/Cable length | Pre-wired with SAE J1772/25' (7.62 m) or 18' (5.49 m) |
| MECHANICAL DATA | |
| Enclosure mounting | Wall or pedestal mounted (pedestal sold separately) |
| Enclosure dimensions (L × W × D) | 19.7" x 8.9" x 5.3" (500 mm x 226 mm x 135 mm) |
| Weight | 17.8 lbs. (8.1 kg) |
| ENVIRONMENTAL SPECIFICATIONS | |
| Enclosure rating | NEMA Type 4 - watertight |
| Environment rating | Indoor and outdoor |
| Operating / Storage temperature | –22°F to 122°F (–30°C to 50°C)/–40°F to 176°F (–40°C to 80°C) |
| COMPLIANCE SPECIFICATIONS | |
| Codes and standards | NEC Article 625, SAE J1772, NACS, ENERGY STAR®, UL |
| Safety compliance |
|
| EMC compliance | FCC Part 15 Class B |
| Short-circuit protection | 5000 RMS Symmetrical Amps at 240 VAC |
| Open safety ground detection | Features a continuous earth ground monitor to ensure consistent connection to good earth ground |
| Ground fault detection | Ground fault protection integral, CCID 20 mA, auto reset |
| Auto-reclosure | System will automatically resume standard operation after a minor power fault has cleared |
| FEATURES | |
| Installation Type | Hardwired installation (3 ft service whip provided) for secure and permanent setup |
| Connector Type | Lockable SAE J1772 connector, impact- and crush-resistant, watertight, and corrosion-resistant for safe and reliable connection |
| Cable Length | 25 ft flexible charging cable for easy reach across parking spaces or installation layouts |
| Enclosure Rating | Fully sealed NEMA 4-rated enclosure protects against water, dust, and extreme environmental conditions |
| Power Efficiency | ENERGY STAR® certified for low standby power use and optimal energy efficiency |
| Automatic Circuit Reclosure | Automatically rechecks and resumes charging after minor power faults to maintain uptime |
| Vehicle Compatibility | Universally compatible with all electric vehicles sold in North America using the SAE J1772 standard |
| Cable Management System | Integrated cable wrap and wall-mounted holster to keep the charging cord neatly organized and off the ground. |
| Warranty | 3-year |
| User Rating | N/A |
| Price | $1,333 |
Smart Features of Enphase ClipperCreek HCS-80 EV Charger with J1772 connector
- Automatic Circuit Reclosure: Restores power automatically after minor electrical faults, ensuring uninterrupted charging performance with minimal downtime.
- Energy-Efficient Operation: Designed for low standby consumption, conserving power when idle without compromising charging readiness.
- Integrated Cable Management: Built-in cable wrap and wall-mounted holster keep the 25 ft cord neatly stored and protected.
- All-Weather Design: Fully sealed NEMA 4 enclosure allows installation indoors or outdoors, offering reliable performance in any environment.
- High-Durability J1772 Connector: Lockable and impact-resistant connector ensures secure, weatherproof charging compatible with all North American EVs.
- Compact Mounting Options: Streamlined design supports wall or pedestal installation for easy placement in garages, lots, or commercial sites.
Product guides and documents of Enphase ClipperCreek HCS-80 EV Charger with J1772 connector
Enphase ClipperCreek HCS-80 EV Charger product Manual Sheet
Enphase ClipperCreek HCS-80 EV Charger product Technical Specification Sheet
Advantages of the Enphase ClipperCreek HCS-80 EV Charger with J1772 connector
- Powerful Output: Provides 64 A (15.4 kW) of power, enabling fast and efficient Level 2 charging for multiple EV models.
- Universal Compatibility: Compatible with every EV sold in North America using the SAE J1772 standard connector.
- Rugged Durability: Built with heavy-duty materials for long-term use in extreme climates or high-traffic environments.
- Energy Efficiency Certified: ENERGY STAR® certified for superior energy efficiency and cost-effective performance.
- Easy Cable Handling: 25 ft flexible cable provides excellent reach and convenient use for various parking configurations.
- Comprehensive Warranty: Backed by a 3-year limited warranty for lasting confidence and dependable support.
Disadvantages of the Enphase ClipperCreek HCS-80 EV Charger with J1772 connector
- Hardwired Installation: Requires professional setup, adding to installation time and initial cost.
- No Wi-Fi or Smart App Integration: Lacks remote monitoring or smart-home connectivity.
- Fixed Mount Configuration: Permanent installation limits relocation or mobility options.
- High Power Circuit Requirement: Needs an 80 A supply circuit, which may require electrical upgrades in older properties.
- Commercial Focus: May offer more capacity than required for single-vehicle home users.
- No Display Interface: Operates through LED indicators only, without a digital screen or smart display.