Enphase Share2 HCS-80 EV Charger Bundle
The Enphase Share2 HCS-40 EV Charger Bundle delivers an efficient, cost-effective charging solution designed for dual-vehicle locations. Equipped with advanced Share2 technology, this bundle allows two 32 A chargers to operate simultaneously on a single 40 A circuit, maximizing energy usage and infrastructure efficiency.
Built with rugged NEMA 4 enclosures, these chargers provide reliable indoor and outdoor performance under any conditions. The impact-resistant J1772 connectors and 25 ft cables ensure convenient reach and durability, while automatic circuit reclosure functionality maintains consistent operation. Each unit includes integrated cable wraps and holsters for a clean, organized charging environment.
Charging Speed
The Enphase Share2 HCS-80 EV Charger Bundle delivers up to 15.4 kW of charging power, adding approximately 60 miles of driving range per hour under optimal conditions.
Technical Specifications
| ELECTRICAL SPECIFICATIONS | |
| Charging power | 32 A (7.7 kW) max |
| Input voltage/Input voltage range | 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC |
| Input voltage frequency | 50/60 Hz |
| Circuit breaker requirement | Dedicated, 2-pole 40 A |
| Input cable type | Pre-wired (L1, L2, Gnd) 8 AWG service whip / Pre-wired with: NEMA 14-50P |
| Input cable length |
|
| Maximum output current/Output power | 32 A continuous/7.7 kW |
| Output cable/Cable length | Pre-wired with SAE J1772/25' (7.6 m) or 18' (5.5) 1 |
| MECHANICAL DATA | |
| Enclosure mounting | Wall or pedestal mounted (pedestal sold separately) |
| Enclosure dimensions (L × W × D) | 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) |
| Weight | 13.5 lbs. (6.1 kg) |
| ENVIRONMENTAL SPECIFICATIONS | |
| Enclosure rating | NEMA Type 4 - watertight |
| Environment rating | Indoor/outdoor rated |
| Operating / Storage temperature | -22°F to 122°F (-30°C to 50°C)/-40°F to 176°F (-40°C to 80°C) |
| COMPLIANCE SPECIFICATIONS | |
| Codes and standards | NEC Article 625, SAE J1772, ENERGY STAR®, UL, NOM |
| Safety compliance |
|
| EMC compliance | FCC Part 15 Class B |
| Short-circuit protection | 5000 RMS Symmetrical Amps at 240 VAC |
| Open safety ground detection | Features a continuous earth ground monitor to ensure consistent connection to good earth ground |
| Ground fault detection | Ground fault protection integral, CCID 20 mA, auto reset |
| Auto-reclosure | System will automatically resume standard operation after a minor power fault has cleared |
| FEATURES | |
| Power Sharing Function | Allows two chargers to operate on a single 40 A circuit; automatically allocates power between vehicles |
| Connector Type | Ruggedized SAE J1772 connectors, impact and crush resistant, compatible with all EVs sold in North America |
| Installation Type | Hardwired setup (3 ft service whip provided) for secure and permanent installation |
| Cable Length | 25 ft charging cables for flexible positioning and convenient reach to multiple parking spots |
| Enclosure Rating | Fully sealed NEMA 4-rated enclosure, resistant to dust, rain, and harsh weather conditions |
| Operating Temperature Range | Performs reliably in environments from –22°F to +122°F (–30°C to +50°C) |
| Load Balancing Method | Intelligent Share2 control dynamically splits current (32 A single, 16 A each dual) for balanced performance |
| Cable Management System | Integrated cable wrap and dual connector holsters to keep cords neatly organized and off the ground |
| Warranty | 5-year |
| User Rating | N/A |
| Price | $2,550 |
- Share2 Load Balancing Technology: Enables two chargers to share a single 40 A circuit, intelligently distributing power based on active charging demand.
- Automatic Power Adjustment: Supplies 32 A to one vehicle or divides evenly (16 A each) when two vehicles are charging simultaneously.
- Self-Recovery System: Automatically restores charging after minor power faults, ensuring continuous functionality without manual resets.
- Integrated Cable Management: Each charger includes a 25 ft cable with a wrap and holster to keep charging cords secure and elevated.
- Rugged Design: Constructed with durable J1772 connectors and watertight, corrosion-resistant housings for dependable use in high-traffic or outdoor environments.
- Smart Installation Flexibility: Supports wall or pedestal mounting, making it ideal for multi-vehicle parking areas or commercial applications.
Enphase Share2 HCS-40 EV Charger Bundle Product Manual Sheet
Enphase Share2 HCS-40 EV Charger Bundle Product Technical Specification Sheet
- Dual Charging Capability: Allows two EVs to charge from a single electrical circuit, saving space and reducing installation costs.
- High Efficiency: Optimizes available power, ensuring both vehicles charge safely and efficiently without overloading the system.
- Universal Compatibility: Works with all North American electric vehicles using the SAE J1772 standard connector.
- Energy-Efficient Operation: ENERGY STAR® certified for reduced power consumption and environmentally responsible performance.
- All-Weather Durability: Fully sealed NEMA 4 enclosure provides reliable operation in extreme temperatures and weather conditions.
- Comprehensive Warranty: Supported by a 5-year limited warranty, ensuring long-term confidence and dependable performance.
- Hardwired Installation: Requires a licensed electrician for setup, which can add to initial installation costs.
- Shared Output Limitation: When two vehicles charge simultaneously, available power splits, extending total charging time.
- No Wireless Connectivity: Lacks Wi-Fi or app-based monitoring typically found in smart home chargers.
- Fixed Installation: Permanently mounted design limits flexibility for relocation or temporary use.
- Higher Initial Investment: Dual setup and professional installation contribute to a higher upfront cost than basic chargers.