Enphase HCS-D40 Dual EV Charger: Difference between revisions
| Line 16: | Line 16: | ||
| Charging power || 32 A (7.7 kW) max. | | Charging power || 32 A (7.7 kW) max. | ||
|- | |- | ||
| Input voltage/Input voltage range || 208/240 VAC (L-L), single-phase/185 | | Input voltage/Input voltage range || 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC | ||
|- | |- | ||
| Input voltage frequency || 50/60 Hz | | Input voltage frequency || 50/60 Hz | ||
|- | |- | ||
| Circuit breaker requirement || Dedicated, 2-pole | | Circuit breaker requirement || Dedicated, 2-pole 40 A | ||
|- | |- | ||
| Input cable type || Pre-wired | | Input cable type || Pre-wired (L1, L2, Gnd) 8 AWG service whip / Pre-wired with: NEMA 14-50P | ||
|- | |- | ||
| Input cable length || | | Input cable length || | ||
| Line 28: | Line 28: | ||
* 12" (304.8 mm) | * 12" (304.8 mm) | ||
|- | |- | ||
| Maximum output current/Output power || 32 A continuous/7.7 kW | | Maximum output current/Output power || 32 A continuous (or 2 × 16 A continuous) 1 | ||
/7.7 kW | |||
|- | |- | ||
| Output cable/Cable length || Pre-wired with SAE J1772/25' (7. | | Output cable/Cable length || Pre-wired with: Two SAE J1772/25' (7.6 m) or 18' (5.5 m) 2 | ||
|- | |- | ||
| '''MECHANICAL DATA''' || | | '''MECHANICAL DATA''' || | ||
| Line 38: | Line 39: | ||
| Enclosure dimensions (L × W × D) || 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) | | Enclosure dimensions (L × W × D) || 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) | ||
|- | |- | ||
| Weight || | | Weight || 21 lbs. (9.5 kg) | ||
|- | |- | ||
| '''ENVIRONMENTAL SPECIFICATIONS''' || | | '''ENVIRONMENTAL SPECIFICATIONS''' || | ||
| Line 44: | Line 45: | ||
| Enclosure rating || NEMA Type 4 - watertight | | Enclosure rating || NEMA Type 4 - watertight | ||
|- | |- | ||
| Environment rating || Indoor | | Environment rating || Indoor/outdoor rated | ||
|- | |- | ||
| Operating / Storage temperature || | | Operating / Storage temperature || -22°F to 122°F (-30°C to 50°C)/-40°F to 176°F (-40°C to 80°C) | ||
|- | |- | ||
| '''COMPLIANCE SPECIFICATIONS''' || | | '''COMPLIANCE SPECIFICATIONS''' || | ||
|- | |- | ||
| Codes and standards || NEC Article 625, SAE J1772 | | Codes and standards || NEC Article 625, SAE J1772, ENERGY STAR®, UL, NOM | ||
|- | |- | ||
| Safety compliance || | | Safety compliance || | ||
* UL 2594, UL 2251, UL 2231-1, UL 2231-2, UL 1998, UL 991 | * UL 2594, UL 2251, UL 2231-1, UL 2231-2, UL 1998, UL 991 | ||
* C22.2 No. 280-13, CSA C22.2 No. 282, CSA C22.2 No. 281.1, CSA C22.2 No. 281.2, CSA C22.2 No. 0.8 | * C22.2 No. 280-13, CSA C22.2 No. 282, CSA C22.2 No. 281.1, CSA C22.2 No. 281.2, CSA C22.2 No. 0.8 | ||
* NOM-001-SCFI-2018 | |||
|- | |- | ||
| EMC compliance || FCC Part 15 Class B | | EMC compliance || FCC Part 15 Class B | ||
| Line 68: | Line 70: | ||
| '''FEATURES''' || | | '''FEATURES''' || | ||
|- | |- | ||
| | | Two sets of three LED Indicators || Amber LED: Power, Red LED: Fault, Green LED: Charging | ||
|- | |- | ||
| Optional cable management || 18' output cable can be made retractable using this option 2 (cable retractor sold separately) | |||
|- | |||
| High-Power Output || Provides 32 A of consistent charging power, supporting rapid, reliable energy delivery for modern electric vehicles of varying battery capacities | | High-Power Output || Provides 32 A of consistent charging power, supporting rapid, reliable energy delivery for modern electric vehicles of varying battery capacities | ||
|- | |- | ||
Revision as of 00:42, 21 October 2025
Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector
The Enphase HCS-D40 Dual EV Charger delivers reliable Level 2 charging with dual-vehicle capability on a single circuit. Designed for maximum efficiency and flexibility, it provides up to 31 miles of range per hour when charging one vehicle, or 15 miles per hour when two vehicles are connected simultaneously.
Built with a rugged, fully sealed NEMA 4 enclosure, it ensures dependable performance indoors or outdoors. Engineered for durability and safety, the Enphase HCS-D40 combines advanced charging power with intelligent energy management for long-term reliability.
Charging Speed
The Enphase HCS-D40 delivers up to 7.7 kW (32 A) charging power, enabling approximately 31 miles of range per hour for one vehicle or 15 miles for two vehicles simultaneously.
Technical Specifications
| ELECTRICAL SPECIFICATIONS | |
| Charging power | 32 A (7.7 kW) max. |
| Input voltage/Input voltage range | 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC |
| Input voltage frequency | 50/60 Hz |
| Circuit breaker requirement | Dedicated, 2-pole 40 A |
| Input cable type | Pre-wired (L1, L2, Gnd) 8 AWG service whip / Pre-wired with: NEMA 14-50P |
| Input cable length |
|
| Maximum output current/Output power | 32 A continuous (or 2 × 16 A continuous) 1
/7.7 kW |
| Output cable/Cable length | Pre-wired with: Two SAE J1772/25' (7.6 m) or 18' (5.5 m) 2 |
| MECHANICAL DATA | |
| Enclosure mounting | Wall or pedestal mounted (pedestal sold separately) |
| Enclosure dimensions (L × W × D) | 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) |
| Weight | 21 lbs. (9.5 kg) |
| ENVIRONMENTAL SPECIFICATIONS | |
| Enclosure rating | NEMA Type 4 - watertight |
| Environment rating | Indoor/outdoor rated |
| Operating / Storage temperature | -22°F to 122°F (-30°C to 50°C)/-40°F to 176°F (-40°C to 80°C) |
| COMPLIANCE SPECIFICATIONS | |
| Codes and standards | NEC Article 625, SAE J1772, ENERGY STAR®, UL, NOM |
| Safety compliance |
|
| EMC compliance | FCC Part 15 Class B |
| Short-circuit protection | 5000 RMS Symmetrical Amps at 240 VAC |
| Open safety ground detection | Features a continuous earth ground monitor to ensure consistent connection to good earth ground |
| Ground fault detection | Ground fault protection integral, CCID 20 mA, auto reset |
| Auto-reclosure | System will automatically resume standard operation after a minor power fault has cleared |
| FEATURES | |
| Two sets of three LED Indicators | Amber LED: Power, Red LED: Fault, Green LED: Charging |
| Optional cable management | 18' output cable can be made retractable using this option 2 (cable retractor sold separately) |
| High-Power Output | Provides 32 A of consistent charging power, supporting rapid, reliable energy delivery for modern electric vehicles of varying battery capacities |
| Dual 18 ft Cables | Two heavy-duty, impact-resistant cables extend flexibility to reach multiple parking spaces with minimal effort |
| NEMA 4 Protection | Weather-sealed and corrosion-resistant housing ensures safe performance in garages, outdoor lots, or commercial settings |
| Hardwired Installation | Built-in 3 ft service whip allows professional, secure installation for maximum power efficiency and permanent reliability. |
| Universal Connector Type | Equipped with ruggedized SAE J1772 connectors compatible with all North American EV models |
| Compact Build | Space-saving design (19.7" × 8.9" × 5.3") fits seamlessly into residential and commercial environments |
| Integration support | OCPP 1.6 and Enphase APIs |
| Warranty | 5-year |
| User Rating | N/A |
| Price | $916 |
Smart Features of Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector
- Dual-Vehicle Charging: Efficiently splits power between two EVs, supplying up to 16 A each, ensuring balanced energy distribution and reduced charging times for multiple vehicles.
- Automatic Circuit Reclosure: Integrated fault recovery system re-checks power conditions to safely resume charging after minor interruptions.
- Ruggedized J1772 Connectors: Impact-resistant and over-molded connectors ensure long-lasting performance and compatibility with all EVs sold in North America.
- Integrated Cable Management: Built-in cable wrap and connector holsters keep charging cords neatly stored and protected when not in use.
- Energy-Efficient Operation: Designed with minimal standby power consumption, providing continuous readiness while reducing energy waste.
- Flexible Installation: Hardwired setup supports both wall and pedestal mounting, allowing adaptable installation options for varied environments.
Product guides and documents of Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector
Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector Product Manual Sheet
Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector Technical Specification Sheet
Advantages of the Enphase - Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector
- Simultaneous Charging Capability: Charges two vehicles on one circuit, optimizing space and reducing infrastructure costs.
- Durable Outdoor Design: Fully sealed NEMA 4 enclosure ensures reliability under extreme weather conditions.
- Universal Compatibility: Works seamlessly with any EV featuring the SAE J1772 standard in North America.
- High Charging Output: Provides up to 7.7 kW of power, significantly shortening charging time for most electric vehicles.
- Certified Safety Assurance: ETL listed and ENERGY STAR® certified, guaranteeing compliance with rigorous performance and safety standards.
- Long Warranty Coverage: Backed by a 5-year limited warranty, offering strong product confidence and long-term support.
Disadvantages of the Enphase - Enphase HCS-D40 Dual EV Charger with Ruggedized J1772 Connector
- Hardwired Installation Required: Professional installation is necessary, limiting plug-and-play convenience for casual users.
- Limited Cable Length: The 18-foot cable may not reach distant parking spots without additional accessories.
- No Smart App Control: Lacks advanced connectivity features such as Wi-Fi monitoring or remote scheduling.
- Single Power Split: Power divides equally between two vehicles, potentially reducing speed when both are connected.
- Higher Initial Cost: Premium build quality and dual-charging capability result in a higher upfront price compared to standard single chargers.