Enphase HCS-D40 Dual EV Charger: Difference between revisions

Revision as of 00:06, 21 October 2025

Enphase HCS-D40 Dual EV Charger with J1772 Connector

The Enphase HCS-D40 Dual EV Charger delivers reliable Level 2 charging with dual-vehicle capability on a single circuit. Designed for maximum efficiency and flexibility, it provides up to 31 miles of range per hour when charging one vehicle, or 15 miles per hour when two vehicles are connected simultaneously.

Built with a rugged, fully sealed NEMA 4 enclosure, it ensures dependable performance indoors or outdoors. Engineered for durability and safety, the Enphase HCS-D40 combines advanced charging power with intelligent energy management for long-term reliability.

Charging Speed

The Enphase HCS-D40 delivers up to 7.7 kW (32 A) charging power, enabling approximately 31 miles of range per hour for one vehicle or 15 miles for two vehicles simultaneously.

Technical Specifications

ELECTRICAL SPECIFICATIONS
Charging power	32 A (7.7 kW) max.
Input voltage/Input voltage range	208/240 VAC (L-L), single-phase/185 VAC–264 VAC
Input voltage frequency	50/60 Hz
Circuit breaker requirement	Dedicated, 2-pole 60 A
Input cable type	Pre-wired with: (L1, L2, Gnd) 8 AWG service whip
Input cable length	3' (914.4 mm) 12" (304.8 mm)
Maximum output current/Output power	32 A continuous/7.7 kW
Output cable/Cable length	Pre-wired with SAE J1772/25' (7.62 m)
MECHANICAL DATA
Enclosure mounting	Wall or pedestal mounted (pedestal sold separately)
Enclosure dimensions (L × W × D)	19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm)
Weight	19.0 lb (8.6 kg)
ENVIRONMENTAL SPECIFICATIONS
Enclosure rating	NEMA Type 4 - watertight
Environment rating	Indoor and outdoor
Operating / Storage temperature	–22°F to 122°F (–30°C to 50°C)/–40°F to 176°F (–40°C to 80°C)
COMPLIANCE SPECIFICATIONS
Codes and standards	NEC Article 625, SAE J1772, NACS, ENERGY STAR®, UL
Safety compliance	UL 2594, UL 2251, UL 2231-1, UL 2231-2, UL 1998, UL 991 C22.2 No. 280-13, CSA C22.2 No. 282, CSA C22.2 No. 281.1, CSA C22.2 No. 281.2, CSA C22.2 No. 0.8
EMC compliance	FCC Part 15 Class B
Short-circuit protection	5000 RMS Symmetrical Amps at 240 VAC
Open safety ground detection	Features a continuous earth ground monitor to ensure consistent connection to good earth ground
Ground fault detection	Ground fault protection integral, CCID 20 mA, auto reset
Auto-reclosure	System will automatically resume standard operation after a minor power fault has cleared
FEATURES
Four LED indicators	Amber LED: Power, Green LED: Charging, 1st red LED: Power fault, 2nd red LED: Charging fault
High-Power Output	Provides 32 A of consistent charging power, supporting rapid, reliable energy delivery for modern electric vehicles of varying battery capacities
Dual 18 ft Cables	Two heavy-duty, impact-resistant cables extend flexibility to reach multiple parking spaces with minimal effort
NEMA 4 Protection	Weather-sealed and corrosion-resistant housing ensures safe performance in garages, outdoor lots, or commercial settings
Hardwired Installation	Built-in 3 ft service whip allows professional, secure installation for maximum power efficiency and permanent reliability.
Universal Connector Type	Equipped with ruggedized SAE J1772 connectors compatible with all North American EV models
Compact Build	Space-saving design (19.7" × 8.9" × 5.3") fits seamlessly into residential and commercial environments
Integration support	OCPP 1.6 and Enphase APIs
Warranty	5-year
User Rating	N/A
Price	$916

Smart Features of Enphase HCS-D40 Dual EV Charger with J1772 Connector

Dual-Vehicle Charging: Efficiently splits power between two EVs, supplying up to 16 A each, ensuring balanced energy distribution and reduced charging times for multiple vehicles.

Automatic Circuit Reclosure: Integrated fault recovery system re-checks power conditions to safely resume charging after minor interruptions.

Ruggedized J1772 Connectors: Impact-resistant and over-molded connectors ensure long-lasting performance and compatibility with all EVs sold in North America.

Integrated Cable Management: Built-in cable wrap and connector holsters keep charging cords neatly stored and protected when not in use.

Energy-Efficient Operation: Designed with minimal standby power consumption, providing continuous readiness while reducing energy waste.

Flexible Installation: Hardwired setup supports both wall and pedestal mounting, allowing adaptable installation options for varied environments.

Product guides and documents of Enphase HCS-D40 Dual EV Charger with J1772 Connector

Enphase - HCS-40 EV Charger with J1772 Connector Product Manual Sheet

Enphase - HCS-40 EV Charger with J1772 Connector Technical Specification Sheet

Advantages of the Enphase - Enphase HCS-D40 Dual EV Charger with J1772 Connector

Simultaneous Charging Capability: Charges two vehicles on one circuit, optimizing space and reducing infrastructure costs.

Durable Outdoor Design: Fully sealed NEMA 4 enclosure ensures reliability under extreme weather conditions.

Universal Compatibility: Works seamlessly with any EV featuring the SAE J1772 standard in North America.

High Charging Output: Provides up to 7.7 kW of power, significantly shortening charging time for most electric vehicles.

Certified Safety Assurance: ETL listed and ENERGY STAR® certified, guaranteeing compliance with rigorous performance and safety standards.

Long Warranty Coverage: Backed by a 5-year limited warranty, offering strong product confidence and long-term support.

Disadvantages of the Enphase - Enphase HCS-D40 Dual EV Charger with J1772 Connector

Hardwired Installation Required: Professional installation is necessary, limiting plug-and-play convenience for casual users.

Limited Cable Length: The 18-foot cable may not reach distant parking spots without additional accessories.

No Smart App Control: Lacks advanced connectivity features such as Wi-Fi monitoring or remote scheduling.

Single Power Split: Power divides equally between two vehicles, potentially reducing speed when both are connected.

Higher Initial Cost: Premium build quality and dual-charging capability result in a higher upfront price compared to standard single chargers.

@@ Line 1: / Line 1: @@
 == Enphase HCS-D40 Dual EV Charger with J1772 Connector==
-The Enphase IQ 40 EV Charger is a smart and efficient Level 2 charging station designed to provide seamless energy management and flexible scheduling through the Enphase App. With 7.7 kW of charging power, this advanced charger delivers consistent performance while integrating with the Enphase Energy System for optimized solar charging.
+The Enphase HCS-D40 Dual EV Charger delivers reliable Level 2 charging with dual-vehicle capability on a single circuit. Designed for maximum efficiency and flexibility, it provides up to 31 miles of range per hour when charging one vehicle, or 15 miles per hour when two vehicles are connected simultaneously.
-Built with a durable, impact-resistant J1772 connector, the IQ 40 EV Charger ensures broad compatibility with most EV models. A NEMA 4-rated enclosure allows for both indoor and outdoor installations, offering reliability in various environments. The 25-ft charging cable enhances convenience, while third-party safety certifications provide peace of mind.
+Built with a rugged, fully sealed NEMA 4 enclosure, it ensures dependable performance indoors or outdoors. Engineered for durability and safety, the Enphase HCS-D40 combines advanced charging power with intelligent energy management for long-term reliability.
 === Charging Speed ===
-  Delivering up to 31 miles of range per hour, the IQ 40 EV Charger ensures efficient charging with 7.7 kW of power. Custom scheduling and off-peak charging options help optimize energy usage and reduce electricity costs.
+  The Enphase HCS-D40 delivers up to 7.7 kW (32 A) charging power, enabling approximately 31 miles of range per hour for one vehicle or 15 miles for two vehicles simultaneously.
 [[File:Enphase_IQ_EV_Charger_Orginal.png|frameless|right]]
@@ Line 70: / Line 70: @@
 | Four LED indicators || Amber LED: Power, Green LED: Charging, 1st red LED: Power fault, 2nd red LED: Charging fault
 |-
-| Smart scheduling || Take advantage of time-of-use energy savings from your utility
+| High-Power Output || Provides 32 A of consistent charging power, supporting rapid, reliable energy delivery for modern electric vehicles of varying battery capacities
 |-
-| Self-consumption || Charge EVs on clean energy from the sun by using excess solar power with an Enphase Energy System
+| Dual 18 ft Cables || Two heavy-duty, impact-resistant cables extend flexibility to reach multiple parking spaces with minimal effort
 |-
-| Main panel upgrade avoidance || EVSE dynamic power management1 with PCS-LC and UL 3141 certified
+| NEMA 4 Protection || Weather-sealed and corrosion-resistant housing ensures safe performance in garages, outdoor lots, or commercial settings
 |-
-| Storm Guard || Ensure the EV is fully charged and ready when there is a storm alert in the area
+| Hardwired Installation || Built-in 3 ft service whip allows professional, secure installation for maximum power efficiency and permanent reliability.
 |-
-| Remote start/stop || Use the app to remotely control your EV charger with start and stop functions
+| Universal Connector Type || Equipped with ruggedized SAE J1772 connectors compatible with all North American EV models
 |-
-| Connectivity || Wi-Fi 2.4 GHz and Bluetooth
+| Compact Build || Space-saving design (19.7" × 8.9" × 5.3") fits seamlessly into residential and commercial environments
 |-
 | Integration support || OCPP 1.6 and Enphase APIs
@@ Line 92: / Line 92: @@
 == Smart Features of Enphase HCS-D40 Dual EV Charger with J1772 Connector==
-* '''Solar-Powered Charging:''' When integrated with an Enphase Energy System, EVs can be charged using surplus solar energy, reducing reliance on the grid.
+* '''Dual-Vehicle Charging:''' Efficiently splits power between two EVs, supplying up to 16 A each, ensuring balanced energy distribution and reduced charging times for multiple vehicles.
-* '''App-Based Control & Monitoring:''' The Enphase App provides real-time tracking, remote access, and customizable charging schedules for efficient energy management.
+* '''Automatic Circuit Reclosure:''' Integrated fault recovery system re-checks power conditions to safely resume charging after minor interruptions.
-* '''Universal EV Compatibility:''' The J1772 connector ensures seamless charging for a wide range of electric vehicles, making it a versatile choice.
+* '''Ruggedized J1772 Connectors:''' Impact-resistant and over-molded connectors ensure long-lasting performance and compatibility with all EVs sold in North America.
-* '''Weatherproof & Durable:''' The NEMA 4-rated enclosure offers superior protection against environmental elements, making it suitable for both indoor and outdoor use.
+* '''Integrated Cable Management:''' Built-in cable wrap and connector holsters keep charging cords neatly stored and protected when not in use.
-* '''Optimized Energy Usage:''' Customizable scheduling enables off-peak charging, taking advantage of lower electricity rates for cost-effective operation.
+* '''Energy-Efficient Operation:''' Designed with minimal standby power consumption, providing continuous readiness while reducing energy waste.
-* '''Certified Safety Standards:''' Third-party certifications from NRTL and cETLus ensure high safety standards for reliable and secure charging.
+* '''Flexible Installation:''' Hardwired setup supports both wall and pedestal mounting, allowing adaptable installation options for varied environments.
 [[File:Enphase_EV_Charger.jpeg|800px]]
@@ Line 112: / Line 112: @@
 == Advantages of the Enphase - Enphase HCS-D40 Dual EV Charger with J1772 Connector==
-* '''Reliable Charging Speed:''' With 7.7 kW of power, the charger provides a strong balance of speed and efficiency, adding up to 31 miles of range per hour.
+* '''Simultaneous Charging Capability:''' Charges two vehicles on one circuit, optimizing space and reducing infrastructure costs.
-* '''Energy-Efficient Operation:''' The ENERGY STAR® certification guarantees optimized energy consumption, reducing unnecessary power waste.
+* '''Durable Outdoor Design:''' Fully sealed NEMA 4 enclosure ensures reliability under extreme weather conditions.
-* '''Strong & Durable Build:''' The impact-resistant J1772 connector and weatherproof enclosure ensure long-lasting performance in various conditions.
+* '''Universal Compatibility:''' Works seamlessly with any EV featuring the SAE J1772 standard in North America.
-* '''Flexible Installation:''' Designed for both indoor and outdoor setups, making it suitable for homes, workplaces, and commercial properties.
+* '''High Charging Output:''' Provides up to 7.7 kW of power, significantly shortening charging time for most electric vehicles.
-* '''Smart Grid Integration:''' Works with the Enphase Energy System to enable intelligent solar energy utilization and grid connectivity.
+* '''Certified Safety Assurance:''' ETL listed and ENERGY STAR® certified, guaranteeing compliance with rigorous performance and safety standards.
-* '''Comprehensive Customer Support:''' Backed by 24/7 customer service and a 5-year limited warranty, ensuring long-term dependability.
+* '''Long Warranty Coverage:''' Backed by a 5-year limited warranty, offering strong product confidence and long-term support.
 == Disadvantages of the Enphase - Enphase HCS-D40 Dual EV Charger with J1772 Connector==
-* '''Limited to Level 2 Charging:''' While offering efficient AC charging, it does not support DC fast charging, which is essential for ultra-rapid refueling.
+* '''Hardwired Installation Required:''' Professional installation is necessary, limiting plug-and-play convenience for casual users.
-* '''Higher Upfront Cost:''' Advanced features and solar integration capabilities result in a higher price compared to standard Level 2 chargers.
+* '''Limited Cable Length:''' The 18-foot cable may not reach distant parking spots without additional accessories.
-* '''Wi-Fi Dependency for Smart Features:''' Remote access and monitoring via the Enphase App require a stable internet connection for full functionality.
+* '''No Smart App Control:''' Lacks advanced connectivity features such as Wi-Fi monitoring or remote scheduling.
-* '''Fixed Cable Length:''' The 25-ft cable may not be long enough for all parking setups, requiring careful placement during installation.
+* '''Single Power Split:''' Power divides equally between two vehicles, potentially reducing speed when both are connected.
-* '''Solar Benefits Require Enphase System:''' To fully utilize solar charging features, integration with an Enphase Energy System is necessary.
+* '''Higher Initial Cost:''' Premium build quality and dual-charging capability result in a higher upfront price compared to standard single chargers.
 == Where to buy ==
 * [https://enphase.com/store/ev-chargers/ev-chargers-business/hcs-40-ev-charger Official]
 * [https://www.amazon.com/dp/B01L0CIR1U/ref=sspa_dk_detail_2?th=1 Amazon]