Enphase Share2 HCS-80 EV Charger Bundle: Difference between revisions
| (2 intermediate revisions by the same user not shown) | |||
| Line 14: | Line 14: | ||
| '''ELECTRICAL SPECIFICATIONS''' || | | '''ELECTRICAL SPECIFICATIONS''' || | ||
|- | |- | ||
| Charging power || | | Charging power || 64 A (15.4 kW) max | ||
|- | |- | ||
| Input voltage/Input voltage range || 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC | | Input voltage/Input voltage range || 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC | ||
| Line 20: | Line 20: | ||
| Input voltage frequency || 50/60 Hz | | Input voltage frequency || 50/60 Hz | ||
|- | |- | ||
| Circuit breaker requirement || Dedicated, 2-pole | | Circuit breaker requirement || Dedicated, 2-pole 80 A | ||
|- | |- | ||
| Input cable type || Pre-wired (L1, L2, Gnd) 8 AWG service whip / | | Input cable type || Pre-wired with (L1, L2, Gnd) 8 AWG service whip/3' (914.4 mm) | ||
|- | |- | ||
| Input cable length || | | Input cable length || | ||
| Line 28: | Line 28: | ||
* 12" (304.8 mm) | * 12" (304.8 mm) | ||
|- | |- | ||
| Maximum output current/Output power || | | Maximum output current/Output power || 64 A continuous/15.4 kW | ||
|- | |- | ||
| Output cable/Cable length || Pre-wired with SAE J1772/25' (7.6 m) or 18' (5.5) | | Output cable/Cable length || Pre-wired with SAE J1772/25' (7.6 m) or 18' (5.5 m) | ||
|- | |- | ||
| Line 39: | Line 39: | ||
| Enclosure dimensions (L × W × D) || 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) | | Enclosure dimensions (L × W × D) || 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) | ||
|- | |- | ||
| Weight || | | Weight || 17.8 lbs. (8.1 kg) | ||
|- | |- | ||
| '''ENVIRONMENTAL SPECIFICATIONS''' || | | '''ENVIRONMENTAL SPECIFICATIONS''' || | ||
| Line 90: | Line 90: | ||
| '''User Rating''' || N/A | | '''User Rating''' || N/A | ||
|- | |- | ||
| '''Price''' || $ | | '''Price''' || $3,660 | ||
|} | |} | ||
| Line 109: | Line 109: | ||
== Product guides and documents of Enphase Share2 HCS-80 EV Charger Bundle With J1772 connectors== | == Product guides and documents of Enphase Share2 HCS-80 EV Charger Bundle With J1772 connectors== | ||
[[Media:Enphase_Share2_HCS- | [[Media:Enphase_Share2_HCS-80_EV_Charger_Bundle_Product_Manual_Sheet.pdf|Enphase Share2 HCS-80 EV Charger Bundle Product Manual Sheet]] | ||
[[Media:Enphase_Share2_HCS- | [[Media:Enphase_Share2_HCS-80_EV_Charger_Bundle_Product_Technical_Specification_Sheet.pdf|Enphase Share2 HCS-80 EV Charger Bundle Product Technical Specification Sheet]] | ||
== Advantages of the Enphase Share2 HCS-80 EV Charger Bundle With J1772 connectors== | == Advantages of the Enphase Share2 HCS-80 EV Charger Bundle With J1772 connectors== | ||
| Line 138: | Line 138: | ||
== Where to buy == | == Where to buy == | ||
* [https://enphase.com/store/ev-chargers/ev-chargers-business/share2-hcs- | * [https://enphase.com/store/ev-chargers/ev-chargers-business/share2-hcs-80-ev-charger-bundle Official] | ||
Latest revision as of 08:55, 30 October 2025
The Enphase Share2 HCS-80 EV Charger Bundle delivers a powerful, space-efficient charging solution ideal for multi-vehicle environments. Engineered with advanced Share2 technology, it allows two 64 A chargers to operate on a single 80 A circuit, reducing installation costs and doubling charging capacity.
Designed for durability and reliability, the HCS-80 bundle features rugged construction, impact-resistant connectors, and a fully sealed NEMA 4 enclosure. Each unit includes a 25 ft charging cable, ensuring easy reach to multiple parking spaces while maintaining a clean, organized setup for commercial and fleet applications.
Charging Speed
The Enphase Share2 HCS-80 EV Charger Bundle delivers up to 15.4 kW of charging power, adding approximately 60 miles of driving range per hour under optimal conditions.
Technical Specifications
| ELECTRICAL SPECIFICATIONS | |
| Charging power | 64 A (15.4 kW) max |
| Input voltage/Input voltage range | 208/240 VAC (L-L), single-phase/185 VAC – 264 VAC |
| Input voltage frequency | 50/60 Hz |
| Circuit breaker requirement | Dedicated, 2-pole 80 A |
| Input cable type | Pre-wired with (L1, L2, Gnd) 8 AWG service whip/3' (914.4 mm) |
| Input cable length |
|
| Maximum output current/Output power | 64 A continuous/15.4 kW |
| Output cable/Cable length | Pre-wired with SAE J1772/25' (7.6 m) or 18' (5.5 m) |
| MECHANICAL DATA | |
| Enclosure mounting | Wall or pedestal mounted (pedestal sold separately) |
| Enclosure dimensions (L × W × D) | 19.7" × 8.9" × 5.3" (500 mm × 226 mm × 135 mm) |
| Weight | 17.8 lbs. (8.1 kg) |
| ENVIRONMENTAL SPECIFICATIONS | |
| Enclosure rating | NEMA Type 4 - watertight |
| Environment rating | Indoor/outdoor rated |
| Operating / Storage temperature | -22°F to 122°F (-30°C to 50°C)/-40°F to 176°F (-40°C to 80°C) |
| COMPLIANCE SPECIFICATIONS | |
| Codes and standards | NEC Article 625, SAE J1772, ENERGY STAR®, UL, NOM |
| Safety compliance |
|
| EMC compliance | FCC Part 15 Class B |
| Short-circuit protection | 5000 RMS Symmetrical Amps at 240 VAC |
| Open safety ground detection | Features a continuous earth ground monitor to ensure consistent connection to good earth ground |
| Ground fault detection | Ground fault protection integral, CCID 20 mA, auto reset |
| Auto-reclosure | System will automatically resume standard operation after a minor power fault has cleared |
| FEATURES | |
| Power Sharing Function | Allows two chargers to operate on a single 40 A circuit; automatically allocates power between vehicles |
| Connector Type | Ruggedized SAE J1772 connectors, impact and crush resistant, compatible with all EVs sold in North America |
| Installation Type | Hardwired setup (3 ft service whip provided) for secure and permanent installation |
| Cable Length | 25 ft charging cables for flexible positioning and convenient reach to multiple parking spots |
| Enclosure Rating | Fully sealed NEMA 4-rated enclosure, resistant to dust, rain, and harsh weather conditions |
| Operating Temperature Range | Performs reliably in environments from –22°F to +122°F (–30°C to +50°C) |
| Load Balancing Method | Intelligent Share2 control dynamically splits current (32 A single, 16 A each dual) for balanced performance |
| Cable Management System | Integrated cable wrap and dual connector holsters to keep cords neatly organized and off the ground |
| Warranty | 5-year |
| User Rating | N/A |
| Price | $3,660 |
- Share2 Power Sharing Technology: Allows two chargers to share a single circuit efficiently, providing flexible power allocation and maximizing electrical infrastructure.
- Automatic Load Balancing: Supplies 64 A to one vehicle or evenly splits power (32 A each) when two EVs are charging simultaneously.
- Self-Recovery Circuit Function: Automatically detects and resolves minor power faults to ensure continuous, reliable charging with minimal downtime.
- Cable Management System: Integrated 25 ft cable wrap and holster keep charging cords neat, protected, and off the ground.
- Impact-Resistant J1772 Connectors: Built with watertight, corrosion-resistant materials for dependable performance in high-traffic and outdoor environments.
- All-Weather Protection: Fully sealed NEMA 4 enclosure safeguards components against rain, dust, and extreme temperatures for reliable year-round use.
Enphase Share2 HCS-80 EV Charger Bundle Product Manual Sheet
Enphase Share2 HCS-80 EV Charger Bundle Product Technical Specification Sheet
- Dual Charging Capability: Supports two electric vehicles from one circuit, maximizing charging efficiency and reducing installation costs.
- High-Power Output: Delivers up to 64 A per station or shared 32 A output, ensuring fast Level 2 charging for all EVs.
- Universal Compatibility: Compatible with every electric vehicle sold in North America using the SAE J1772 standard connector.
- Rugged Commercial Design: Built for heavy usage and adverse weather conditions, ideal for public, fleet, or workplace charging.
- Energy-Efficient Performance: ENERGY STAR® certified to reduce power consumption and operating costs.
- Extended Warranty Coverage: Backed by Enphase’s 5-year limited warranty for lasting reliability and peace of mind.
- Hardwired Installation: Requires professional setup and a dedicated 80 A circuit, adding to installation time and cost.
- Shared Power Output: When two vehicles charge simultaneously, charging speed decreases due to automatic power distribution.
- No Wi-Fi or App Control: Lacks wireless connectivity or mobile app support for remote monitoring and management.
- Fixed Installation Design: Permanently mounted configuration limits portability or relocation flexibility.
- Commercial-Focused Design: Overbuilt for residential needs, making it more suitable for multi-EV or business applications.
